Gas furnace maintenance checklist (free)

The gas furnace checklist techs use in Tech Gibberish, from the burners and flame sensor to venting and the carbon monoxide reading. Print it, mark each item, and write readings in the note line.

For trained HVAC technicians. Follow your company's safety procedures and shut off and lock out power before working inside equipment.

Gas Furnace checklist (24 items)

Check each item and write the reading or what you did (OK, cleaned, replaced, needs attention) on the note line.

  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:
  • Reading or note:

What to tell the customer

Example lines a tech might write:

  • "We cleaned the flame sensor. A dirty sensor can make a furnace shut off shortly after it lights."
  • "We vacuumed out the furnace cabinet and checked the burners."
  • "We ran the furnace through a full heating cycle and it started and shut down normally."

Do this in 2 minutes

Do this in 2 minutes: tap this checklist in Tech Gibberish, add a few words, and get the customer report to paste into your invoice. 15 free reports, no credit card.

Try it free

Built by an HVAC company owner who uses it every day.

Free checklist from tech-gibberish.com